As Synology is the leading player in NAS devices, its products are widely used in both home and business surroundings for modern data storage and networking purposes. It ensures the availability of information, transfer and backup of them. But initially, the users may have trouble contacting their Synology NAS through the web address, an interruption which may impact productivity as well as data access. This write-up touches details on many reasons why you cannot do find.synology.com login and offers a few tried and tested ways to troubleshoot and fix the underlying problem.
How to Fix Synology NAS Web Address Not Working Issue?
A Synology NAS can often be accessed via a web address. On the other hand, occasional attempts to open a web page might be unsuccessful. This problem can be caused by different reasons like incorrect settings, system IP change or conflicts in the software.
How to Access Synology NAS Web Address Hassle-Free?
-
Check the WiFi Connection
Be sure that a NAS is connected to your router and it is in the power on status. Verify if your computer is using the same network that the NAS server is using too. Now, check whether you are able to resolve the issue at hand or not. No? Well then, you should keep reading.
-
Disable the Firewall Software
Make sure that your router’s firewall or any of the security software installed on your computer are not impeding the access to the NAS. In case it is, then it is recommended that you disable it. Along with this, also disable the antivirus software.
-
Check the DSM Problems
If you think Diskstation Manager or DSM may be the culprit, most likely that the NAS got updated not long ago or been modified. If the first attempt of connecting your computer to the DSM by Ethernet cable using a manual IP address in the range of the NAS didn’t work, you can try using one of the NAS’ IP addresses.
-
Reset the NAS System
The process to get connected to the NAS may be performed via an Ethernet connection. From the DSM Control Panel, a reset of the network settings can be done to the default mode. Be alert for total reset because it can be utilized to reset your NAS to factory settings , which can bring negative impact for your data and configuration.
-
Update the NAS Firmware
DSM firmware which is out of date may sometimes disrupt connectedness though. In case you acquired your machine directly from DMS, try if you have permissions to visit the internal website controlling panel and then look for possible updates in there: Control Panel > Update & Restore. Now, check if you are able to access the web address of your Synology NAS system this time or not. We hope that you get luck this time.
To learn about more troubleshooting ways, go through the manual. There you will find information on various other topics like Synology download center, and much more.
Sum Up
Multiple aspects of an access issue to a Synology NAS may arise from the disruption of a network or configuration inappropriateness. By diligently debugging, addressing wires’ connections and setting the network to ensure that every confrontation is well resolved is mostly possible.
Frequent backups of your NAS data are unfailingly important to keep you from loss. It becomes essential to take precautions like backing up the data before a reset or reinstallation process begins. We are anticipating that with the help of this post, you will be able to resolve the issue that you have been experiencing.
